Innovation without boundaries
A few years ago Callaway’s CEO Chip Brewer came to our Head of R&D Dr. Alan Hocknell with a unique request. Chip asked, “If you could design the very best iron that you would play, if you wanted maximum performance without any limits to the cost or engineering process, what would that be?” Alan is a passionate golfer, and he was excited by the endless possibilities for such an ambitious project. Once he determined what the iron should be, he dedicated more than 70 of the best engineers in golf to the project with two key messages: we want groundbreaking innovations, and there are no boundaries.
The engineering team had the freedom to give these irons every performance advantage by using the most ultra-premium materials and advancing some of the most revolutionary technologies in the industry. We were confident they would make something special, yet the final product greatly exceeded our expectations. And we knew that it deserved to be called Epic.
Features:
Next-Generation 360 Face Cup Technology for Longer Average Distance
- Advancing the industry-leading face technology that made Callaway the #1 Iron in golf, the rim of the Face Cup is 1 mm at its thinnest point to add even more ball speed on center hits and further minimizing distance loss on off-center hits
Exo-Cage for Energy Lensing and Maximum COR
- Exo-Cage head construction stiffens the body to allow the face to take on more of the load of impact. This is known as “Energy Lensing” - it promotes faster ball speed for longer distance, and it helped raise the COR in Epic Irons right up to the limit in each iron. We’ve never reached that level of speed in a full set
Multi-Material Standing Wave To Optimize CG Location
- Multi-material construction demands strict tolerances, seamless fit and secure bonding. Epic Pro Irons are precision-milled and robotically welded, and every iron in this set is uniquely constructed for maximum integrity and optimum performance. Incorporating tungsten in the Internal Standing Wave allowed Callaway engineers to precisely position the CG in each individual iron. This includes a lower CG for easier launch and long carry in the long irons, higher CG in the short irons for a lower, more controllable flight, and left-to-right CG control in tandem with the hollow hosel
Shaft Information
|
|||||
| Flex | Shaft Weight | Torque | Kickpoint | ||
| Regular [5.5] | 100g | Low | Mid | ||
| Stiff [6.0] | 100g | Low | Mid | ||
- Certified Pre-Owned Clubs may be personalized or stamped with "DEMO".
Pre-Owned Club Conditions
Condition: Like New
Shows virtually no traces of wear, may have been hit one or more times in controlled conditions. May show signs of very minor "shop wear" (i.e. a single cosmetic blemish), but still full of NEWNESS!
Watch Video
Condition: Excellent
Clubs have seen minimal usage and are in top of the line preowned condition. You may see some minor or faint cosmetic blemishes (i.e. very light scuffing and/or scratching). Typical wear that you will see on an Excellent condition club is normal ball marks that are lightly visible on the face, minimal scratching to the crown, sole and edges. Shaft has no noticeable wear.
Watch Video
Condition: Very Good
Clubs have seen normal usage for an extended period of time or at least one season, the wear you’ll notice will be typical of the age of the model. All of the wear is purely cosmetic, and will not in any way affect the performance of the club. Typical wear you’ll see on a Very Good condition club is normal ball marks and scratching on the face, normal scratching on the sole, faint dings and nicks on the crown and/or around the edges of the head, light scratches, paint chips, paint blemishes on or around the crown. Shaft has minimal wear.
Watch Video
Condition: Value
Clubs offer a great value for someone who isn't as interested in cosmetics, but cares about performance. Shows frequent to heavy use, but does not show any signs of abuse. All clubs in Value Condition are in 100% playable condition, which is the perfect option for the player looking for more bang for the buck. Typical wear you’ll see on a Value condition club is moderate to heavy ball marks and scratching on the face, moderate to heavy scratching on the sole, moderate to heavy dings and nicks on the crown and/or around the edges of the head, moderate to heavy scratches, and paint chips/ blemishes on or around the crown. Shaft will have noticeable wear.
Watch Video